Ciev, Mode, Keyp – Siemens MC55 User Manual
Page 64: Disp, Obile, Mc55 at command set
MC55 AT Command Set
3.1 AT+CMER
s
m
obile
MC55_ATC_V01.05
Page 64 of 469
2/10/04
Confidential / Released
Unsolicited Result Code
+CIEV:
A value of an indicator has changed.
Command Description
The read command returns the URC presentation mode
and among others, the indicator event reporting
.
The write command enables and disables the presentation of "
:
,
" URCs.
refers to the name of a "
" indicator and
is the new value of this indicator. All
registered indicator events will be issued to the TE.
Parameter Description
0
(&F)
Discard "
" URCs.
1
Discard "
" and "
" URCs when TA-TE link is reserved, e.g. in
online data mode. Otherwise they are forwarded directly to the TE.
2
Buffer "
" and "
" URCs in the TA while TA-TE link is reserved, e.g.
in online data mode, and flush them to the TE afterwards. Otherwise they are
forwarded directly to the TE.
3
Forward "
" and "
" URCs directly to the TE. If MC55 is in online
data mode, URCs are signaled via sending BREAK (100ms) and stored in a
buffer. Once it is back in command mode e.g. after
was entered, all URCs
stored in the buffer will be output.
0
(&F)
Keypad event reporting is not supported by MC55.
0
(&F)
Display event reporting is not supported by MC55.
0
(&F)
Disable indicator event reporting.
2
Enable indicator event reporting.
0
(&F)
TA buffer of URCs defined within this command is cleared when
1..3
is entered.
Name of indicator; for a list of all supported indicators please refer to
and
.
Value of indicator; for a list of all values for the supported indicators please refer to
and
(num)
(num)
(num)
(num)
(num)
(str)
(num)