Siemens MC55 - Manual (Page 307)

MC55 AT Command Set
11.24 AT+FRS
s
m
obile
MC55_ATC_V01.05 Page 307 of 469 2/10/04
Confidential / Released
11.24 AT+FRS Receive Silence
Syntax
Command Description
=n causes the TA to report an OK result code to the TE after 10 millisecond intervals of silence
have been detected on the line. This command is aborted if any character is received by the DTE. The modem
discards the aborting character and issues an OK result code. An ERROR response code results if this command
is issued while the mode is on-hook
Parameter Description
no. of 10 millisecond intervals
0...255
Note
• Used for Fax Class 1 only
Write Command
AT+FRS=
Response(s)
OK
If error related to ME functionality
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
TIA/EIA-578
(num)