Obile, Mc55 at command set – Siemens MC55 User Manual
Page 347
MC55 AT Command Set
12.19 AT^SMGL
s
m
obile
MC55_ATC_V01.05
Page 347 of 469
2/10/04
Confidential / Released
12.19
AT^SMGL List SMS messages from preferred store without set-
ting status to REC READ
Syntax
Command Description
The execute command is the same as the write command, but uses the given default of
.
The write command allows to select a status type and lists, from the message storage
, all messages
that currently have the specified
. The major difference over the standard command
is that the
status of the listed messages remains u n c h a n g e d (unread remains unread).
Notes
• The selected
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• This command can be used only after the SMS data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read
commands will result in ''+CME Error: 14'' (SIM busy)
Test Command
AT^SMGL=?
Response(s)
same as
Exec Command
AT^SMGL
Response(s)
^SMGL:
(For default values of
, see Chapter "
.)
OK
Write Command
AT^SMGL=
Response(s)
same as
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
%
%
%
%
%
%
Reference(s)
SIEMENS