Siemens MC55 - Manual (Page 180)

MC55 AT Command Set
7.26 AT+CSNS
s
m
obile
MC55_ATC_V01.05 Page 180 of 469 2/10/04
Confidential / Released
7.26 AT+CSNS Single Numbering Scheme
Syntax
Command Description
The
AT+CSNS
command enables the ME to accept incoming calls when no bearer capability information is pro-
vided with the call, e.g. single numbering scheme calls or calls originitating from analog devices.
Parameter Description
[0] (D) Voice: Each call received without bearer element is assumed to be speech
2 Fax: Each call received without bearer element is assumed to be an incoming
fax.
4 Data: Each call received without bearer element is assumed to be a data call.
Please take into account that the bearer service parameters set with
AT+CBST
apply to all data calls including those received without bearer capability.
Test Command
AT+CSNS=?
Response(s)
+CSNS:
(list of supported s)
OK
Read Command
AT+CSNS?
Response(s)
+CSNS:
OK
Write Command
AT+CSNS=
[ ]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07
(num)