Siemens MC55 - Manual (Page 388)

MC55 AT Command Set
15.8 AT^SPBS
s
m
obile
MC55_ATC_V01.05 Page 388 of 469 2/10/04
Confidential / Released
you find entries starting with matching characters. However, do not use the listed index numbers to dial out
with
ATD>
or to modify entries with
AT+CPBW
.
• To access an entry found with
AT^SPBS
for editing or dialing, enter
AT^SPBS
with the parameter
cReq>
=1. Then extract the "real" location number of the entry from response parameter and
use this "real" location number with
ATD>
or
AT+CPBW
.
See examples below.
Parameter Description
1 To make a step forward in the alphabetically sorted phonebook.
2 To make a step backward in the alphabetically sorted phonebook.
1...maxindex The index in the sorted list of phonebook entries that identifies the first entry
displayed.
The value of
is determined by the value of the
counter>
and by parameter .
After a write command has terminated successfully with "OK", the value from
parameter
is saved and retained as the new
counter>
value.
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the second entry
displayed.
= ( +1).
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the third entry
displayed.
= ( +1).
Mind after the last record of phonebook, the first entry follows.
string type phone number in format specified by .
the number parameter may be an empty string.
type of address octet
145 dialling string includes international access code character '+'
(num)
(num)
(num)
(num)
(str)
(num)