Siemens MC55 - Manual (Page 38)

MC55 AT Command Set
2.7 ATZ
s
m
obile
MC55_ATC_V01.05 Page 38 of 469 2/10/04
Confidential / Released
2.7 ATZ Set all current parameters to user defined profile
Syntax
Command Description
TA sets all current parameters to the user profile stored with
AT&W
. If a connection is in progress, it will be termi-
nated.
All defined GPRS contexts which are not activated or not online will be undefined (see
AT+CGDCONT
,
AT+CGQREQ
and
AT+CGQMIN
command).
The user defined profile is stored to the non-volatile memory.
Parameter Description
[0] Reset to user profile
Notes
• First the profile will be set to factory default (see
AT&F
). If there is a valid user profile (stored with
AT&W
), this
profile will be loaded afterwards.
• Any additional commands on the same command line may be ignored. A delay of 300 ms is required before
next command is sent, otherwise "OK" response may be corrupted.
Exec Command
ATZ
[ ]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
V.25ter
(num)