Siemens MC55 - Manual (Page 310)

MC55 AT Command Set
11.27 AT+FTS
s
m
obile
MC55_ATC_V01.05 Page 310 of 469 2/10/04
Confidential / Released
11.27 AT+FTS Stop Transmission and Wait
Syntax
Command Description
This command causes the TA to terminate a transmission and wait for 10 millisecond intervals before
responding with the OK result code to the DTE.
Parameter Description
no. of 10 millisecond intervals
0...85
Note
• Used for Fax Class 1 only
Write Command
AT+FTS=
Response(s)
An ERROR response code results if this command is issued while the modem is on-
hook.
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
TIA/EIA-578
(num)