Siemens MC55 - Manual (Page 52)

MC55 AT Command Set
2.12 AT+CSCS
s
m
obile
MC55_ATC_V01.05 Page 52 of 469 2/10/04
Confidential / Released
2.12 AT+CSCS Select TE character set
Syntax
Command Description
Write command informs TA which character set is used by the TE. TA is then able to convert character
strings correctly between TE and ME character sets.
Parameter Description
“GSM“ (&F) GSM default alphabet (GSM 03.38 subclause 6.2.1);
Note: This setting may cause software flow control problems since the codes
used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)
are interpreted as normal characters.
“UCS2“ 16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2
character strings are converted to hexadecimal numbers from 0000 to FFFF;
e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98
and 99, $(AT R97)$
Test Command
AT+CSCS=?
Response(s)
+CSCS:
(list of supported s)
OK
Read Command
AT+CSCS?
Response(s)
+CSCS:
OK
Write Command
AT+CSCS=
[ ]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07, GSM 11.11
(str)