2 at&v display current configuration, 1 at&v responses, At&v display current configuration – Siemens MC55 User Manual
Page 31: At&v responses, At&v, Obile
MC55 AT Command Set
2.2 AT&V
s
m
obile
MC55_ATC_V01.05
Page 31 of 469
2/10/04
Confidential / Released
2.2
AT&V Display current configuration
Syntax
Command Description
TA returns the current parameter setting. The configuration varies depending on whether or not PIN authentica-
tion has been done and whether or not Multiplex mode is enabled (see
).
Parameter Description
[0]
Profile number
Notes
can only be displayed after the SMS data from the SIM have been read success-
fully for the first time. Reading starts after successful SIM authentication has been performed, and may take
up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to read the
parameter will result in empty values.
• The parameter of
will only be displayed in SMS text mode, see
2.2.1
AT&V responses
The following tables show four different kinds of responses depending on whether or not the PIN is entered and
whether or not the Multiplex mode is enabled (see
Exec Command
AT&V
]
Response(s)
ACTIVE PROFILE:
... (see section
)
OK
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
§
%
§
§
Reference(s)
V.25ter
(num)