3 at^spic display pin counter, At^spic display pin counter, At^spic – Siemens MC55 User Manual
Page 110: Obile, Mc55 at command set
MC55 AT Command Set
5.3 AT^SPIC
s
m
obile
MC55_ATC_V01.05
Page 110 of 469
2/10/04
Confidential / Released
5.3
AT^SPIC Display PIN counter
Syntax
Command Description
The read command returns an identification of the currently required password, e.g. the PIN, PUK, PH-SIM PUK
etc. The
returned by the execute command refers to this password. In case there is no currently
required password (the responses to "
?" both read "READY"), the read command
nevertheless identifies the password to which the execute command response refers.
The execute command returns the number of attempts still available for entering the currently required password,
e.g. the PIN, PUK, PH-SIM PUK etc. To check whether or not you need to enter a password usecommands
? and
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC:
OK
Exec Command
AT^SPIC
Response(s)
^SPIC:
OK
Write Command
AT^SPIC=
Response(s)
^SPIC:
OK
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
%
%
%
%
Reference(s)
SIEMENS