Siemens MC55 - Manual (Page 255)

MC55 AT Command Set
10.7 AT+CGPADDR
s
m
obile
MC55_ATC_V01.05 Page 255 of 469 2/10/04
Confidential / Released
10.7 AT+CGPADDR Show PDP address
Syntax
Command Description
The test command returns a list of defined s.
The write command returns a list of PDP addresses for the specified context identifiers.
Parameter Description
a numeric parameter which specifies a particular PDP context definition (see
AT+CGDCONT
command).
a string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no is specified, the write command will return a list of all defined contexts.
Test Command
AT+CGPADDR=?
Response(s)
+CGPADDR:
(list of supported s)
OK
Write Command
AT+CGPADDR=
[ [ [... ]]]
Response(s)
+CGPADDR:
,
+CGPADDR:
...
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
(num)
(str)