New pin, Code, Obile – Siemens MC55 User Manual
Page 108: Mc55 at command set
MC55 AT Command Set
5.2 AT+CPIN2
s
m
obile
MC55_ATC_V01.05
Page 108 of 469
2/10/04
Confidential / Released
If the requested code was SIM PUK2: new password (PIN2).
See Chapter
for more information about when you may need to enter the PUK.
READY
ME is not pending for any password.
SIM PIN2
ME is waiting for SIM PIN2.
This
is returned only when PIN2 authentication has not yet been done
or has failed (+CME ERROR:17).
SIM PUK2
ME is waiting for SIM PUK2.
This
is returned only when PIN2 authentication has failed and ME is
pending for SIM PUK2 (i.e. +CME ERROR:18).
Note
• Functions accessible only after PIN2 authentication:
: Accumulated call meter (ACM) reset or query
: Accumulated call meter maximum (ACMmax) set or query
: Facility lock to "FD" (Fixed dialing phonebook)
: Facility lock to "FD" (Fixed dialing phonebook)
: Change "P2"password
: Change "P2"password
: Price per unit and currency table
: Enter SIM PIN2 or SIM PUK2 if requested.
For example, SIM PIN2 will be needed when you attempt to edit the "FD" phonebook and ME returns +CME
Error 17 or +CPIN: SIM PIN2.
Once the required
has been entered correctly, PIN2 authentication code changes to READY. After
300s, a repetition of the authentication process is required (PIN2 authentication code changes from READY
to SIM PIN2).
Examples
EXAMPLE 1
To change PIN2:
EXAMPLE 2
To unblock a disabled PIN2:
(str)
(text)
AT+CPWD="P2","0000","8888"
(where "0000" = old PIN2 and "8888" = new PIN2)
OK
AT+CPIN2?
+CPIN2: SIM PUK2
PIN2 has been disabled, PUK2 must be entered
OK
to define a new PIN2
AT+CPIN2=12345678,8888
where "12345678" is the PUK2, and "8888" the new
PIN2.