2 at+cpbr read from phonebook, At+cpbr, Obile – Siemens MC55 User Manual

Page 371: Mc55 at command set

MC55 AT Command Set

15.2 AT+CPBR

obile

MC55_ATC_V01.05

Page 371 of 469

2/10/04

Confidential / Released

15.2

AT+CPBR Read from Phonebook

This command serves to read one or more entries from the phonebook selected with AT command

AT+CPBS

It can be used only after the phonebook's data has been read from the SIM successfully. Reading starts after
successful SIM authentication has been performed and may take up to 30 seconds depending on the SIM used.
While this read process is in progress, an attempt to use any of the phonebook commands will result in "+CME
Error: SIM busy".

Syntax

Command Description

The test command returns the location range supported by the current phonebook storage, the maximum length
of

field and the maximum length of

field. Note: Length information may not be available while

SIM storage is selected. If storage does not offer format information, the format list contains empty parenthe-
sizes.

The write command determines the phonebook entry to be displayed with

or a location range

from

. Hence, if no

is given only the entry at

will