Siemens MC55 - Manual (Page 126)

MC55 AT Command Set
5.7 AT^SPWD
s
m
obile
MC55_ATC_V01.05 Page 126 of 469 2/10/04
Confidential / Released
5.7 AT^SPWD Change Password
Use this command when you want to change the passwords defined for the "facility lock" functions available from
AT+CLCK
. Specifically the command can be used to
• change PIN1 or PIN2,
• change the password supplied from your provider for the "call barring" supplementary service,
• set individual phone security passwords,
• enter the unblocking key (Master Phone Code) to restore a disabled "PS" password.
See AT commands
AT+CLCK
and
AT^SLCK
for more information on the various lock features.
AT command
AT^SPWD
is identical in every respect to
AT+CPWD
, except that the command syntax and response
prefix is "^SPWD" instead of "+CPWD".
Syntax
Command Description
The test command returns a list of pairs which represent the available facilities and the maximum length of the
associated password.
The write command allows to define a new password for a password protected lock function. Each
password is a string of digits, the length of which varies with the associated .
Note
• For further description please refer to
AT+CPWD
.
Test Command
AT^SPWD=?
Response(s)
^SPWD:
(list of supported ( , )
OK
Write Command
AT^SPWD=
, [, ]
Response(s)
New password has been registered for the facility lock function.
OK
If parameter was not correct:
+CME ERROR 16 (+CME ERROR: incorrect password)
If the password for the selected has been invalidated due to too many failed attempts:
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %