Siemens MC55 - Manual (Page 256)

MC55 AT Command Set
10.8 AT+CGQMIN
s
m
obile
MC55_ATC_V01.05 Page 256 of 469 2/10/04
Confidential / Released
10.8 AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Syntax
Command Description
The test command returns values supported as a compound value. If the MT supports several PDP types, the
parameter value ranges for each PDP type are returned on a separate line.
The read command returns the current settings for each defined context. If no minimum profile was explicitly
specified for a context, simply OK will be returned, but default values will be used for that context.
This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the
negotiated profile returned in the Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local) context identification parameter,
Test Command
AT+CGQMIN=?
Response(s)
+CGQMIN:
, (list of supported s), (list of supported s), (list of
supported s), (list of supported s), (list of supported s)
OK
ERROR
+CME ERROR
Read Command
AT+CGQMIN?
Response(s)
+CGQMIN:
, , , , ,
...
OK
ERROR
+CME ERROR
Write Command
AT+CGQMIN=
[ [, [, [, [, [, ]]]]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07