Siemens MC55 - Manual (Page 245)

MC55 AT Command Set
10.2 AT+CGANS
s
m
obile
MC55_ATC_V01.05 Page 245 of 469 2/10/04
Confidential / Released
10.2 AT+CGANS Manual response to a network request for PDP con-
text activation
Syntax
Command Description
The write command requests the MT to respond to a network request for GPRS PDP context activation which
has been signaled to the TE by the RING or CRING unsolicited result code. The
parameter allows
the TE to accept or reject the request.
Parameter Description
[0] the request is rejected and the MT returns OK to the TE
1 accept and request that the PDP context be activated
a string parameter which indicates the layer 2 protocol to be used (see
AT+CGDATA
command)
a numeric parameter which specifies a particular PDP context definition (see
AT+CGDCONT
command).
Test Command
AT+CGANS=?
Response(s)
+CGANS:
(list of supported s), (list of supported s)
OK
Write Command
AT+CGANS=
[ [, [, ]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
(num)
(str)
(num)