Configuration commands, At&f, Obile – Siemens MC55 User Manual
Page 30
MC55 AT Command Set
2. Configuration Commands
s
m
obile
MC55_ATC_V01.05
Page 30 of 469
2/10/04
Confidential / Released
2.
Configuration Commands
The AT Commands described in this chapter allow the external application to determine the MC55's behaviour
under various conditions.
2.1
AT&F Set all current parameters to manufacturer defaults
Syntax
Command Description
TA sets all current parameters to the manufacturer defined profile.
Parameter Description
[0]
set all TA parameters to manufacturer defaults
Notes
• List of parameters reset to manufacturer default can be found in Chapter
.
• In addition to the default profile, you can store an individual one with
. To alternate between the two pro-
files enter either
(loads user profile) or
(restores factory profile).
• Every ongoing or incoming call will be terminated.
Exec Command
AT&F
]
Response(s)
OK
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
%
%
%
%
Reference(s)
V.25ter
(num)