Succ, Sucs, Obile – Siemens MC55 User Manual
Page 59: Mc55 at command set
MC55 AT Command Set
2.13 AT^SCFG
s
m
obile
MC55_ATC_V01.05
Page 59 of 469
2/10/04
Confidential / Released
CIEV Call Status Indication
This parameter can be used to control the behaviour of URC "
":call. See also
and
Parameter is global for all interfaces and will not be reset by
“restricted“
(P)
URC ""
": call" will be issued only when a Call Status transition ends in
state "active" or "unknown" (see
) for a call in
the list of active calls
“verbose“
URC ""
": call" will be issued when any state transition (including transi-
tions beginning or ending in state "unknown") occurs in the list of active calls,
or when a traffic channel is established
SLCC Call Status Indication
This parameter can be used to control the behaviour of URC "
". See also
Parameter is global for all interfaces and will not be reset by
“restricted“
" will be issued only when a Call Status transition ends in state
) for a call in the list
of active calls
“verbose“
(P)
URC "
" will be issued when any state transition (including transitions
beginning or ending in state "unknown") occurs in the list of active calls, or
when a traffic channel is established.
Note
• Parameters "GPRS/ATS0/withAttach" (
) and "GPRS/RingOnIncomingData" (
) are available
only for modules supporting GPRS.
Examples
EXAMPLE 1
Usage of "Audio/AMR":
(str)(+CSCS)
(str)(+CSCS)
AT+CSCS="UCS2"
Switch to UCS2 character set.
OK
AT^SCFG?
Query all parameters.
...
^SCFG:"Audio/AMR","0065006E00610062006C00650064"
...
OK
AT+CSCS="GSM"
OK
AT^SCFG?
...
^SCFG:"Audio/AMR","enabled"
AMR will be used for any operator.
...