View, Line, Obile – Siemens MC55 User Manual

Page 206

MC55 AT Command Set

8.9 AT^SALS

obile

MC55_ATC_V01.05

Page 206 of 469

2/10/04

Confidential / Released

The write command enables or disables the presentation mode of

and selects the preferred

Parameter Description

Controls the presentation mode of the URC "^SALS" which indicates the line number used by an incoming call:

(&F)

Disables indication of the called line

Enables indication of the called line

Selects the line to be used for outgoing calls.

[1]

ALS Line 1

ALS Line 2

Notes

• The selected

will be saved at non-volatile Flash memory and thus retained after Power Down.

• The

will be reset by

and afterwards saved at non-volatile memory too.

• The

will be reset after Power Down as well as by

• If a non ALS SIM is inserted, the

will be reset to line 1 as well.

Example

(num)

AT^SALS=1,1

Line 1 has been selected for outgoing calls. "^SALS" URC is enabled.

RING

You receive a notification that you have an incoming call on line 2.

^SALS: 2