Siemens MC55 - Manual (Page 111)

MC55 AT Command Set
5.3 AT^SPIC
s
m
obile
MC55_ATC_V01.05 Page 111 of 469 2/10/04
Confidential / Released
If the responses to "
AT+CPIN
?" and "
AT+CPIN2
?" both read "READY", there is no currently required password,
and the referrer of the execute command "AT^SPIC" is explicitly undefined.
In these cases, the read command "AT^SPIC?" may be used to determine, which password the response of the
execute command actually refers to. Also, the write command may be used in order to retrieve the counter for a
specific password.
The write command returns the number of attempts still available for entering the password identified by
, e.g. the PIN, PIN 2, PH-SIM PIN etc.
Parameter Description
Number of attempts for the currently required password. This number will be counted down after each failure.
password for which the corresponding PIN counter is to be displayed .
“SC“ SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed
attempts, the counter for SIM PUK will be returned instead.
“PS“ "phone code" or "device code" (cf.
AT+CLCK
and
AT+CPWD
). If incorrectly
entered three times, the Master Phone Code is required to lift the lock and the
number of remaining attempts for the master phonecode will be returned.
“P2“ SIM PIN 2 or SIM PUK 2. If the SIM PIN 2 has been deactivated after three
failed attempts, the counter for SIM PUK 2 will be returned instead.
“PN“ Network Personalisation
Identification of the currently required password.
SIM PIN ME is waiting for SIM PIN1.
SIM PUK ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
enter PIN1.
SIM PIN2 ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if client attempts to edit the FD
phonebook).
SIM PUK2 ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
command was acknowledged with error +CME ERROR:18.
PH-SIM PIN ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user
inserts other SIM card than the one used for the lock. (''PS'' lock is also referred
to as phone or antitheft lock).
PH-SIM PUK ME is waiting for Master Phone Code, if the above ''PS'' lock password was
incorrectly entered three times.
PH-NET PIN ME is waiting for network personalisation password
PH-NET PUK ME is waiting for network personalisation unblocking password
Notes
• Whenever the required password changes, changes to reflect that change. Please refer to the
examples below.
(num)
(str)
(text)