Siemens MC55 - Manual (Page 323)

MC55 AT Command Set
12.7 AT+CMGS
s
m
obile
MC55_ATC_V01.05 Page 323 of 469 2/10/04
Confidential / Released
12.7 AT+CMGS Send SMS message
Syntax
Command Description
The write command transmits a short message from TE to network (SMS-SUBMIT).
After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes-
sage simply enter
. After the prompt a timer will be started to observe the input.
To abort sending use . Abortion is acknowledged with "OK", though the message will not be sent.
The message reference is returned to the TE on successful message delivery. The value can be used to
identify the message in a delivery status report provided as an unsolicited result code.
Notes
• If sending fails, for example, if a message is too long, the result code depends on the current setting of the
AT^SM20
command:
Test Command
AT+CMGS=?
Response(s)
OK
Write Command
If text mode (see
AT+CMGF
=1)
AT+CMGS=
[, ] Text can be entered. /
Response(s)
+CMGS:
[, ]
OK
If sending fails see notes below.
Write Command
If PDU mode (see
AT+CMGF
=0)
AT+CMGS=
PDU can be entered. /
Response(s)
+CMGS:
[, ]
OK
If sending fails see notes below.
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.05