Callmode, Cmgwmode, Obile – Siemens MC55 User Manual
Page 62
MC55 AT Command Set
2.14 AT^SM20
s
m
obile
MC55_ATC_V01.05
Page 62 of 469
2/10/04
Confidential / Released
Parameter Description
Call setup response mode
Applies only to voice calls.
0
Set compatibility to Siemens mobile phones.
ME will return "OK" immediately after attempting a call with the
command.
In case of failure, additional call release indications, such as "NO DIAL TONE,
"NO CARRIER", "BUSY" will follow.
1
(&F)
Default call setup mode, compatible to M20.
ME will return "OK" in case of a successful connection, otherwise one of the
call release indications "NO DIAL TONE, "NO CARRIER", "BUSY" are indi-
cated.
Response mode for sending and writing short messages
Applies to the sms commands like e.g.
and
command.
0
Set compatibility to Siemens mobile phones.
ME will return +CMS ERROR:
sages fails.
1
(&F)
Default mode for sending and writing short messages, compatible to M20.
ME will return "OK", no matter whether or not sms command was successfully
executed.
(num)
(num)