Siemens MC55 - Manual (Page 297)

MC55 AT Command Set
11.14 AT+FET
s
m
obile
MC55_ATC_V01.05 Page 297 of 469 2/10/04
Confidential / Released
11.14 AT+FET End a page or document
Syntax
Command Description
This command indicates that the current page or partial page is complete. An ERROR response code results if
this command is issued while the mode is on-hook.
Parameter Description
Post Page Message Codes
1 another document next
2 no more pages or documents
4 another page, procedure interrupt
5 another document, procedure interrupt
Note
• Used for Fax Class 2 only
Write Command
AT+FET=
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
(num)