Siemens MC55 - Manual (Page 408)

MC55 AT Command Set
16.12 AT^SNFM
s
m
obile
MC55_ATC_V01.05 Page 408 of 469 2/10/04
Confidential / Released
16.12 AT^SNFM Set microphone audio path and power supply
Syntax
Command Description
The test command returns the supported values of the parameters and .
The read command returns the microphone mute and supply voltage status.
Value of
is valid during a voice call only.
The write command can be used to switch the microphone's audio path (muted / not muted) or to control the
power supply of the MICP2 line (microphone input of the second analog audio interface).
Test Command
AT^SNFM=?
Response(s)
^SNFM:
(list of supported s) , (list of supported s)
OK
Read Command
AT^SNFM?
Response(s)
^SNFM:
,
OK
Write Command
AT^SNFM=
[ ] [, ]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS