Siemens MC55 - Manual (Page 412)

MC55 AT Command Set
16.14 AT^SNFPT
s
m
obile
MC55_ATC_V01.05 Page 412 of 469 2/10/04
Confidential / Released
16.14 AT^SNFPT Set progress tones
Syntax
Command Description
The write command controls the Call Progress Tones generated at the beginning of a mobile originated call
setup.
Parameter Description
0 Disables Call Progress Tones
1 (P) Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Note
• Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
Test Command
AT^SNFPT=?
Response(s)
^SNFPT:
(list of supported s)
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT:
OK
Write Command
AT^SNFPT=
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
(num)