Siemens MC55 - Manual (Page 221)

MC55 AT Command Set
9.5 AT+CCUG
s
m
obile
MC55_ATC_V01.05 Page 221 of 469 2/10/04
Confidential / Released
Parameter Description
explicit CUG invocation options
0 (D) Deactivate explicit CUG invocation
1 Activate explicit CUG invocation
0-9 explicit selection of CUG index
10 (D) No index (preferred CUG taken from subscriber data)
state of the call
0 (D) no information
1 suppress outgoing access
2 suppress preferential CUG
3 Suppress preferential CUG and Outgoing Access.
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• Upon delivery, settings are predefined with
=0,
=10,
=0.
These delivery defaults cannot be recalled automatically.
• When starting a call with
ATD
, Parameter 'G' or 'g' of command
ATD
will have no effect if the option selected
for this single call is identical to the option already selected with
AT+CCUG
.
• Current settings are saved in the ME automatically.
•
ATZ
or
AT&F
do not influence the current settings.
• some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult GSM 04.85
(num)
(num)
(num)