User-assisted diagnostic tests, Security settings – Siemens HIPATH 8000 User Manual
Page 96

Extended Administration
96
User-assisted diagnostic tests
These types of diagnostic tests require a local user to confirm the result at
the optiPoint 410/420.
Security settings
Once a particular test has been started, the local user will assume
full control of the test (using the keypad) until the test is terminated.
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
Display test
>
- 01=Display test
- User-assisted diagnostic tests
- Display test
LED test
>
- 02=LED test
- User-assisted diagnostic tests
- LED test
Key test
>
- 03=Key test
- User-assisted diagnostic tests
- Key test
Audio loop test
>
- 04=Audio loop
- User-assisted diagnostic tests
- Audio loop test
Line monitor
>
- 08=Line monitor
- User-assisted diagnostic tests
- Line monitor
Key Label Test
>
- 13=Key Label Test
- User-assisted diagnostic tests
- Self Labelling keys test
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
Payload Security
allowed
- 02=System
- 47=Payload Security All
(Switch off/on)
- Security Settings
- Payload Security allowed
(mark as allowed)
Connectivity
check interval
- 02=System
- 48=Conn.Check Interval
(enter value)
- Security Settings
- Connectivity check interval
(enter value)
SIP Server
Validate
- 02=System
- 49=SIP Server Validate
(Switch off/on)
- Security Settings
- SIP server validation
(mark as enabled)