beautypg.com

Error messages optipoint 410 entry, No ip address, Terminal mask not assigned – Siemens HIPATH 8000 User Manual

Page 239: No default route, No ip address is set

background image

Troubleshooting

239

Error Messages optiPoint 410 entry

The LEDs flash till you switch to the Administration Mode Æ page 54.

LEDs on the

phone:

No IP address

The DHCP server cannot assign a terminal IP address Æ page 53

Code 1).

Possible solution

Check the DHCP server.

Terminal Mask not assigned

The DHCP server has failed to assign a Terminal Mask Æ page 53

(Code 2).

Possible solution

Check the DHCP server.

No Default Route

The DHCP server cannot assign a default route Æ page 53 (Code 3).

Possible solution

Check the DHCP server.

No IP Address is set

The DHCP IP assignment Æ page 54 is switched off and no terminal IP ad-

dress is configured (Code 4).

Possible solution

Activate the DHCP IP assignment Æ page 54.

Enter the terminal IP adress Æ page 54.

See also other documents in the category Siemens Phones: