Siemens HIPATH 8000 - Manual (Page 201)

Alphabetical Reference
201
Line Primary line
• Every keyset has a primary line with an Address of Record that typi-
cally represents the user of the keyset (line owner). Only one line on a
keyset can be designated as the primary line by the downloaded con-
figuration, all other lines are secondary or and referred to as non-prima-
ry lines.
• Both primary and non-primary lines can be shared or private. For exam-
ple a shared primary line appears as a secondary line on another keyset
which is then able to monitor the calls to the owner of the primary line.
• Some features can only be applied to the primary line to ensure that
conflicting feature settings between different keysets on the same
shared line cannot occur.
• Mark as primary if correct.
Æ page 68 Æ page 128
Line Realm
• This field displays the realm that the phone is registered in.
• Value range table:
Æ page 68 Æ page 128
Line Ring
If the Keyset is not currently in use, and the alerting line is allowed to ring,
the alerting line will get the focus and the optiGuide display will persist un-
til the call is no longer alerting. The audible ringing will be the standard ring
as used on a non-Keyset phone.
Mark ringer on/off.
Æ page 68 Æ page 128
Line user ID
• Enter the according SIP User ID.
• Value range table:
Æ page 68 Æ page 128
A non-Keyset phone only has a single line which is considered to be
the same as the primary line of a Keyset.
Permitted values alphanumeric
Length max. 92 digits
Permitted values alphanumeric
Length max. 92 digits