Terminal ip address, Terminal mask, Terminal name – Siemens HIPATH 8000 User Manual
Page 223: Terminal ip address terminal mask terminal name, Terminal ip addr, Ponding to the æ terminal ip address, Æ terminal, Mask and

Alphabetical Reference
223
Terminal IP address
• Enter the Æ IP address for the optiPoint 410/420 family S V7.0 if not
provided by Æ DHCP dynamically (Æ DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
• Editing by phone: IP Number Editor Æ page 159.
Terminal mask
• Enter the Æ Subnet Mask for the optiPoint 410/420 family S V7.0 if not
provided by Æ DHCP dynamically (Æ DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
• Editing by phone: IP Number Editor Æ page 159.
Terminal name
• The phone will send REGISTER messages containing the contents of
this parameter, but only when the Register by Name field Æ page 210
is set to "On" and the SIP Routing field Æ page 216 is set to "Server".
• Whether this parameter is used, depends on the configuration of the
registrar server.
• Value range table:
• Editing by phone: Text Editor Æ page 155.
Permitted values
numeric
Length max.
15 digits (incl. dots)
Permitted values
numeric
Length max.
15 digits (incl. dots)
Permitted values
alphanumeric
Length max.
92 digits