Siemens HIPATH 8000 - Manual (Page 27)

Using the optiPoint 410/420 family S V7.0
27
Display and Dialog Keys
The optiPoint 410/420 is provided with a four-line (advance)/two-line (econ-
omy/economy plus/standard) display. In the normal operating mode, it dis-
plays the basic menu where you make or receive telephone calls.
optiPoint 410/420 advance
optiPoint 410/420 economy/economy plus/standard
The basic menu shows in its first line the time and date, and the terminal
number or name in the second line. The arrow symbol ">" on the right hand
side of the last display line points to additional functions offered. The third
line of the optiPoint 410/420 advance and the right corner of the second
line of the optiPoint 410/420 economy/economy plus/standard is used for
a free programmable Name e. g. name of the user.
If you want to navigate in menus or make settings, use the three dialog
keys
<
,
>
,
:
and function key "Stop/Escape" to navigate through the
hierarchically built up menu structure. Within this structure, the third (first)
line shows the currently selected menu, the last line a menu item of that
menu.
optiPoint 410/420 advance
optiPoint 410/420 economy/economy plus/standard
You can put the advance in idle mode rapidly by lifting off and replac-
ing the handset.
4:15PM 05.03.04
1228
Username
Menu
>
Time and Date
Terminal number or name
Programmable Username
Menu
4:15PM 05.03.04
1228 Username>
Time and Date
Terminal number or name
Programmable Username
4:15PM 05.03.04
Aministration:
01=Network?
>
Time and Date
Selected Menu
Menu item
Aministration:
01=Network?
>
Selected Menu
Menu item