beautypg.com

Optipoint 410 entry, Configuration using dhcp server – Siemens HIPATH 8000 User Manual

Page 53

background image

Basic Administration

53

Step by Step

optiPoint 410 entry

Configuration using DHCP Server

The optiPoint 410/420 is factory-configured to have an

IP address automatically assigned to it by the DHCP

server as soon as it’s connected to LAN.

If your network use a DHCP server, the telephone will

try to get its IP Address, IP Address Mask, SIP Address-

es (server, gateway, registrar), SNTP Server Address

Configuration Download Server Address and Time Off-

set from the DHCP server (completely list see

Æ

page 38).

In this case the following parameters have to be config-

ured using the Web Interface Administrator Menu.

The Authentication is done via digital Certificates.

For detailed informationen refer to the IEEE

802.1x Configuration Management Administra-

tion Manual.

Parameter

Web Interface path

(Menu Æ page 110)

Terminal Number

Æ

page 224

- SIP environment
- Terminal number
(enter terminal number)

SIP User ID

Æ

page 218

- SIP environment
- SIP user ID
(enter ID)

SIP Password

Æ

page 215

- SIP environment
- New/Confirm SIP password
(enter/re-enter password)

Language

WBM user interface