Siemens HIPATH 8000 - Manual (Page 51)

Basic Administration
51
Manual Configuration
If your network does not use a DHCP server, you must disable the DHCP
IP assignment manually and specify the phone’s IP address and subnet
mask and the network gateway IP address (default route) for the phone.
In this case the following parameters have to be configured:
If you want to use the Web Interface for further administration (phone con-
figuration by PC) you have to reboot the phone now.
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
DHCP
IP Assignment
Æ page 175
- 01=Network
- 01=DHCP IP assign
(switch off)
(not applicable 1 )
1 as long as no IP connection exists
Terminal
IP Address
Æ page 223
- 01=Network
- 02=Terminal IP addr.
(change IP address)
(not applicable * )
Terminal Mask
Æ page 223
- 01=Network
- 03=Terminal mask
(change terminal mask)
(not applicable * )
Default Route
Æ page 174 - 01=Network
- 04=Default route
(change default route)
(not applicable * )