Terminal number, Terminating line preference, Terminal number terminating line preference – Siemens HIPATH 8000 User Manual

Page 224: Term line pref

Alphabetical Reference

224

Terminal number

• The phone will send REGISTER messages containing the contents of

this parameter, but only when the Register by Name field Æ page 210

is set to "Off" and the SIP Routing field Æ page 216 is set to "Server".

• Whether this parameter is used, depends on the configuration of the

registrar server.

• Value range table:

Terminating line preference

Terminating Line selection – provides connection of the phone to one of

the lines appearing on it, on an automatic basis when calls are alerting or

ringing (audible) and the user goes off-hook. There are five terminating op-

tions.

A Keyset is assigned one of the following preferences.
• Ringing Line Preference – A line in the ringing state is selected for ter-

minating calls. In the case of multiple lines, lines shall be selected on a

first-in, first-out basis.

• Ringing Line Preference with prime line preferred – Same as Ring-

ing Line Preference, but if the prime line is ringing at any time it is sig-

naled and selected before calls on secondary lines.

• Incoming Line Preference – In the case of multiple lines alerting or

ringing on a device, an incoming line is selected based on its ringing as-

signment. Ringing lines are selected on a first-in, first-out basis first,

then alerting (visual only) lines are selected on a first-in, first-out basis.

• Incoming Line Preference with prime line preferred – Same as In-

coming Line Preference, but if the prime line is ringing at any time it is

signaled and selected before calls on secondary lines. Prime line must

have ringing arrangement.

• No (Terminating) Line Preference – A line key must be pre-selected

or post-selected each time the user elects to answer a call.

Select the according terminating line preference:

– Ringing
– Incoming
– Incoming PLP
– Ringing PLP
– None

See also Originating line preference on Æ page 204.

Permitted values

numeric

Length min.

1 digit

Length max.

20 digits