Time zone offset, Timer high priority, Timer medium priority – Siemens HIPATH 8000 User Manual
Page 225: Transaction timer, Timezone offset
Alphabetical Reference
225
Time zone offset
• The specification describes the shift in hours corresponding to the time
zone information of the SNTP server.
• Make an entry only if an Æ SNTP server provides time zone informa-
tion.
• Value range table:
• Editing by phone: Offset Editor Æ page 161.
Timer High Priority
Set the delay in seconds after the last high priority item change before sav-
ing the changes to the DLS.
• Causes time out before saving high prioity user data.
• Vaulue range: 0 to 999
Timer Medium Priority
Set the delay in seconds after the last medium priority item change before
saving the changes to the DLS. Used in confjunction with the Medium Pri-
oity peg count threshold.
• Timeout before saving medium priority user data
• The value has to be a number in the range 1 to 999
Transaction timer
The Transaction Timer sets the amount of time that the phone will wait for
a response to any SIP request that it sends. The time value is in millisec-
onds and the user can enter any value between 3000 and 32000. The de-
fault value is 32000 milliseconds.
Permitted values
numeric
min.
-12
max.
+12
Default value
0