beautypg.com

Hot/warm line default dial string, Hot line dial string for selected line, Hot/warm phone – Siemens HIPATH 8000 User Manual

Page 190

background image

Alphabetical Reference

190

Hot/Warm line default dial string

This control allows the administrator to enter a default dial string associat-

ed with the phone to be used in connection with Hot Line or Warm Line

working.

Æ page 64

Æ

page 116

Hot line dial string for selected line

This is the hotline target for this line. Can only be set by administrator in

web interface.

Æ page 128

Hot/Warm Phone

This dropdown allows the user to specify the Hot Line/Warm Line opera-

tion of the phone. There are three options:

Normal line Action: Any Hot Line/Warm Line parameters associated

with the phone will be ignored, regardless of whether or not the phone

is in a keysystem group.

Warm line: If there is a default dial string set against the phone then it

will be automatically dialled (after the delay set with “Initial Digit Tim-

er“) when the user lifts the handset. This occurs regardless of whether

or not the phone is in a keysystem group.

Hot line: There are two cases to consider, depending on whether the

phone is part of a keysystem group.

1. If the phone is part of a keysystem group, there may be a Hot Line dial

string associated with each of the Line keys on the phone

– If there is a Hot Line dial string associated with the line then, it will

be automatically dialled immediately when the line is manually se-
lected.

– If there is not a Hot Line dial string associated with the Line, but

there is a Default dial string set against the phone, then the Default
dial string will be automatically dialled immediately when the line is
manually selected.

– If there is not a Hot Line dial string associated with the Line, and

there is not a Default dial string set against the phone, then the user
will receive dial tone when the line is manually selected.

2. If the phone is not part of a keysystem group.

– If there is a Default dial string set against the phone, then it will be

automatically dialled immediately when the line is manually selected.

– If there is not a Default dial string set against the phone, then the

user will receive dial tone when the line is manually selected.

Æ page 64

Æ

page 116