Rollover type, Rollover volume, Rom test – Siemens HIPATH 8000 User Manual
Page 212: Rtp packet size, Rtp version, Secondary dns ip address, Sec dns ip addr
Alphabetical Reference
212
Rollover type
The Rollover ring setting will be used if the Keyset is currently active in a
call when an incoming call arrives on a different line.
Selectable rollvover types are:
• 1=No ring
• 2=Alert ring
• 3=Standard ring
• 4=Alert beep
Rollover Volume
While you are active on one line of a keyset telephone, the rollover ringing
feature signals additional incoming calls on other lines. The volume can be
set from 1 to 5. For more information see operating manual.
ROM test
• Use this function to test the Æ ROM memory of your optiPoint 410/
420 family S V7.0.
• The results are displayed after the test.
RTP packet size
Use this function to define the RTP G711/G729 packet size. Options are:
• Auto recognition
• 10 milliseconds
• 20 milliseconds
RTP Version
Shows the version of RTP of the optiPoint 410/420 family S V7.0.
Secondary DNS IP address