Port numbering – Siemens HIPATH 8000 User Manual
Page 82
Extended Administration
82
Port Numbering
The phone will provide the ability to configure any TCP or UDP port number
that is currently fixed, with the exception of:
• SNMP
• SNTP
• DNS
• WAP Push
• WAP Push secure.
The table below gives the port addresses that will be configurable. The ta-
ble also shows the default values (see also
– Assigned num-
bers).
In some cases a port base number is used. The port base number will be
the configurable item, not the port numbers derived from the port number
base.
Function
Default
Value
UDP
Default Value
TCP
Comment
RTP port range (local)
5004 to
5006
RTP port number is
even. RTCP port num-
ber is (RTP port num-
ber)+1.
5004 to 5006
reserved by IANA but
can be used by the
phone.
RTP port range (remote)
any
RTCP port range (local)
5005 to
5007
RTP port number is
even. RTCP port num-
ber is (RTP port num-
ber)+1.
5005 to 5007 reserved
by IANA but can be
used by the phone.
RTCP port range (remote)
any
HTTP - Hypertext Transfer Protocol
8085
HTTPS – Secure Hypertext Transfer Protocol
443
SNMP
161
Not configurable
SNMP Traps
162
Not configurable
SNTP
123
Not configurable
SNTP Heart-beat
580
Not configurable
DNS
53
DHCP Server port
67
Default BOOTP port
numbers. Not config-
urable