Branding/identity name, Call recorder (hipath 8000), Branding/identity name call recorder (hipath 8000) – Siemens HIPATH 8000 User Manual
Page 168: System name
Alphabetical Reference
168
Bandwith calculation for WAN (e.g. ATM)
(Values in brackets – security enabled)
Branding/Identity name
• Enter the name (e.g. a company name), which is to be displayed in the
third line of the display in idle mode of the optiPoint 410/
420 family S V7.0.
• Range: Alphanumeric – 10 digits.
• Editing by phone: Text Editor Æ page 155.
Call Recorder (HiPath 8000)
Enter the dial string for example for ASC Call Recording (EVOip). Activate-
or deactivate the "Audible indication".
You can search for calls and replay them e.g. using the standard ASC appli-
cations POWERplay, WEBplay, or INSTANT WEBplay.
Call Recording has to be enabled in the access list (see Æ page 73) and in
the configuration menu of the phone (see user manual).
Voice Codec
Packet size
[ms]
Payload
Bytes
WAN
Packet size
[Bytes]
Used WAN-
Bandwidth
[kBit/s]
G.711
*
*
In the SIP environment it is possible to activate silence supression. In this case the band-
width calculation values are max values
10
80 (90)
125 (125)
100,0 (108,0)
G.711
**
20
160 (170)
205 (215)
82,0 (86,0)
G723
**
** For G.723 it is not possible to activate silence suppression and the only available sample
size is 30 ms
30
24 (34)
69 (79)
18,4 (21,1)
G.729
***
*** In the SIP environment silence suppression is always active currently. In this case the band-
width calculation values are max values.
10
10 (20)
55 (65)
44,0 (52,0)
G.729
***
20
20(30)
65 (75)
22,0 (26,0)
G.722
****
****For G.722 it is not possible to activate silence suppression.
10
80 (90)
125 (135)
100,0 (108,0)
G.722****
20
160 (170)
205 (215)
82,0 (86,0)