IBM Tape Library Magstar 3494 - Manual (Page 350)

Table 43. Export Status Messages (continued)
Message Code Message Text
E0005 ALL EXPORT PROCESSING HAS COMPLETED
This message is generated when the VTS completes an export operation.
Action: None, status only.
E0006 Reserved
Action:
E0007 Reserved
Action:
E0008 Reserved
Action:
E0009 Reserved
Action:
E0010
EXPORT PROCESSING WAITING FOR HOST RESPONSE
This message is generated every 10 minutes when there is no host activity to complete the
processing of the logical volumes in the exported category.
Action: None, status only.
E0011 EXPORT PROCESSING TERMINATED WAITING FOR HOST RESPONSE
This message is generated when the VTS has terminated the export operation because host
processing of the logical volumes in the exported category has been inactive for a period of 60
continuous minutes.
Action: Perform analysis of the Status File on the Export List volume and reissue the Export
operation.
E0012 FRAGMENTS FOR STACKED VOLUME XXXXXX NOT DELETED
There has been a VTS failure to successfully delete all of the fragments for logical volumes which
were exported successfully otherwise.
Action: Call service.
E0013 EXPORT PROCESSING SUSPENDED, WAITING FOR SCRATCH VOLUME
This message is generated every five minutes when the VTS needs a scratch stacked volume to
continue export processing and there are none available.
Action: None, status only.
E0014 EXPORT PROCESSING RESUMED, SCRATCH VOLUME MADE AVAILABLE
This message is generated when, after the export operation was suspended because no scratch
stacked volumes were available, scratch stacked volumes are again available and the export
operation can continue.
Action: None, status only.
328 Magstar 3494 Tape Library Operator Guide
|
||
||
|
|
||
|
||
|
||
|
||
|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|