IBM Tape Library Magstar 3494 - Manual (Page 245)

Operational State Change SNMP Traps
The Operational State Change message format is as follows:
3494 [Library Sequence Number] UNSOL 13 [Mode] [State] [Degraded] [Safety
Enclosure Interlock Open] [Vision System Non-Operational] [Intervention
Required] [Check1] [Storage Cells Full] [Out of Cleaners] [Dual Write
Disabled] [Smoke Detected] [Manual Mode] *Operational State Change
Library Sequence Number
Unique Library Sequence Number of the 3494 Tape Dataserver that
generated the SNMP trap message.
Mode It will be one of the following:
v AUTO
v PAUSE
v MANUAL
State It will be one of the following:
v ONLINE
v OFFLINE
Degraded
It will be one of the following:
v —
v DEGRAD
Safety Enclosure Interlock Open
It will be one of the following:
v —
v SO
Vision System Non-Operational
It will be one of the following:
v —
v VN
Intervention Required
It will be one of the following:
v —
v IR
Check1
It will be one of the following:
v —
v C1
All Storage Cells Full
It will be one of the following:
v —
v SF
Out of Cleaners
It will be one of the following:
v —
v OC
Chapter 6. Advanced Operating Procedures 223