IBM Tape Library Magstar 3494 - Manual (Page 244)

Here the message was generated by the C2444 3494 Tape Dataserver, and the
operator entered “The 3494 Tape Dataserver is being taken offline.”
Library I/O Station State Change SNMP Traps
The Library I/O Station State Change message format is as follows:
3494 [Library Sequence Number] UNSOL 12 [Param A] [Param B] [Param C] [Param D]
[Param E] [Param F] [Param G] [Param H] *I/O Station
Library Sequence Number
The unique Library Sequence Number of the library that generated the
SNMP trap message.
Param A
It will be one of the following:
1. IE - indicating “All Convenience Input Stations Empty”
2. —
Param B
It will be one of the following:
1. IO - indicating “Open Input Door”
2. —
Param C
It will be one of the following:
1. OE - indicating “All Convenience Output Stations Empty”
2. —
Param D
It will be one of the following:
1. OF - indicating “All Convenience Output Station Full”
2. —
Param E
It will be one of the following:
1. II - indicating “3494 I/O Station in Input Mode”
2. —
Param F
It will be one of the following:
1. BA - indicating “Bulk I/O Allowed”
2. —
Param G
It will be one of the following:
1. BF - indicating “Bulk Output Station Full”
2. —
Param H
It will be one of the following:
1. OO - indicating “Open Output Door”
2. —
Example:
3494 C2444 UNSOL 12 IE IO - - II - BF - *I/O Station
222 Magstar 3494 Tape Library Operator Guide