IBM Tape Library Magstar 3494 - Manual (Page 198)

Inventory Update
The Inventory Update facility allows for the following operations:
v Disable Inventory Update
v Enable Inventory Update
v Perform Inventory Update (Full)
v Perform Inventory Update (Partial)
Disable Inventory Update
Select Disable Inventory Update to prevent the inventory update from being
performed after opening and closing a door.
This selection is remembered across shutdowns. See Figure 108 on page 177 for
the Disable Inventory Update dialog box.
Note: Cartridges should only be inserted or ejected through an I/O facility while
Inventory Update is disabled.
Figure 107. VTS Online/Offline Pop-Up Window
176 Magstar 3494 Tape Library Operator Guide