Status codes in status file – IBM Tape Library Magstar 3494 User Manual
Page 338
Table 40. Import Status File
Length
Name
Description
80
Data Set Header 1
80
Data Set Header 2
Tape Mark
80
Import Status File Identifier
N*80
Import Status File Records
N=0 is valid. N is a variable number of file records. See Table 31 on
page 311.
Tape Mark
80
End of File 1
80
End of File 2
Tape Mark
Table 41. Import Status File Identifier
Bytes
Name
Description
0–12
Title Text
“IMPORT STATUS”
13
Field Delimiter
Blank character
14–15
Version
“01”
16
Blank
Blank character
17–32
User Field
This 16 byte field is not checked or used by the control unit
33–79
Retained, Not checked
This field is not checked or used by the control unit
Status Codes in Status File
After the completion of an Export or Import operation, the customer can determine
the completion status of each logical volume that was specified for the operation by
examining the Status File records. The following table describes the status codes,
the probable cause and the recommended actions for the customer to take.
Table 42. Status Codes and Status Text
Operation Status
Resolution Actions
Status Code
00
Status Text
For an Export, contains the destination name, for
Import contains all blanks
Probable Cause
The volume was successfully imported or
exported.
None needed.
316
Magstar 3494 Tape Library Operator Guide
|
|
|
|||
|||
|||
|||
|||
|||
|
|||
|||
|||
|||
|
|
|
|||
|||
|||
|||
|||
|||
|||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|