IBM Tape Library Magstar 3494 - Manual (Page 265)

4. Workstations must be added. See 8 on page 246. Choose Open Workstation
Directory from the Session pull-down.
The DCAF directory window appears. (See Figure 154.) It lists the link records
of the target workstations that are directly connected through the
Communication Protocol.
5. Select the workstation name by either of the following:
a. Positioning the pointing device cursor on the required link (for example,
3494 #1) and double clicking with the left pointing device button.
b. Using the up or down arrow key to select a link record and pressing the
Enter key.
The DCAF target password window appears. See Figure 155 on page 244.
Figure 153. DCAF Controlling Main Window
Figure 154. DCAF Directory
Chapter 7. Remote Library Manager Console Feature 243