IBM Tape Library Magstar 3494 - Manual (Page 342)

Table 42. Status Codes and Status Text (continued)
Operation Status Resolution Actions
Status Code
13
Status Text
Duplicate volume in library
Probable Cause
The logical volume could not be imported
because it already resides in the library
inventory. The library inventory includes logical
volumes in all VTS subsystems within the same
physical library and all physical volumes in the
library.
Determine why the specified volume is a duplicate in the
library.
Status Code
14
Status Text
Duplicate volume in Enterprise
Probable Cause
The logical volume could not be imported
because the attached hosts determined that it
already resides in another library.
Determine why the specified volume is a duplicate in the
enterprise.
Status Code
15
Status Text
Library full
Probable Cause
The logical volume could not be imported
because the library has reached the maximum
number of logical volumes it can support.
1. Export or delete enough logical volumes from the
library to provide room for the needed imported
volumes.
2. Retry the import operation.
Status Code
16
Status Text
Stacked Volume access failure
Probable Cause
For Export, the logical volume could not be
exported because the VTS stacked volume
containing the logical volume could not be
accessed.
For Import, a logical volume or all logical
volumes on the Exported Stacked Volume
specified in the Import List file could not be
imported because the Exported Stacked Volume
could not be accessed.
1. Refer to Figure 83 on page 140. For the volser
indicated, if the Status Flags are Inaccessible or
Misplaced, follow instructions in “Table for Problem
Determination using the Search Database for
Volumes Window” on page 281.
2. If the volser Status Flags are other than Inaccessible
or Misplaced, call an IBM Service Representative.
320 Magstar 3494 Tape Library Operator Guide
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|