IBM Tape Library Magstar 3494 - Manual (Page 193)

Save Logical Volumes
When a complete inventory is requested and the library contains a VTS, the
operator is prompted to save the logical volumes. Answering Yes will save the
logical volumes. They will not need to be reinserted after the inventory completes.
Answering No will erase all the logical volumes. The logical volumes must be
reinserted after the inventory completes.
Set the Volser Range
When selecting a type of inventory, an option is presented to set the volser ranges.
See Figure 102 for information on how to set the volser range.
Figure 101. Save Logical Volumes Window
Figure 102. Set the Volser Range Window
Chapter 6. Advanced Operating Procedures 171
|