IBM Tape Library Magstar 3494 - Manual (Page 182)

The acknowledgment Message has been sent to all attached hosts indicates that
the broadcast was processed.
The following are the push-buttons:
Send Sends the message to all attached hosts.
Cancel
Closes the window.
Help Provides help concerning the Host Message window.
Promote a Command in the Queue
When the Promote a command in the queue selection is made from the
Commands pull-down, the Promote Command pop-up window (see Figure 93) is
displayed.
The list box in the window shows the commands in the command queue. For each
command, the priority and volser, if applicable, are shown. The commands are
Figure 92. Host Message Pop-Up Window
Figure 93. Promote Command Pop-Up Window
160 Magstar 3494 Tape Library Operator Guide