Show port mirror command, Show download status command – Motorola CAJUN P120 User Manual
Page 95
Chapter 7
Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide
81
Show Port Mirror Command
Use the
show port mirror
command to display mirroring info. The syntax of
this command is:
show port mirror
[module_num[/port_num]]
Example:
Console>(enable)
show port mirror 4/1
.
Mirroring both Rx and Tx packets from port 1/1 to port 1/12 is enabled.
Console>(enable)
Show Download Status Command
Use the
show download
command to display the status of the download process.
One session of download is active on the system.
The syntax for this command is:
show download status [slot_num]
Example:
Console>(enable) show download status
TFTP is looking for server.
Download Host IP Address is 149.49.39.110
TFTP Destination Bank is B
Transferred file name - c:\p120\lucent_ver\1_1_2\p120.exe
Received bytes: 0
Request retry counter: 2
Block retry counter: 0
mod_num
(Oprional) number of the module.
port_num
(Optional) number of the source or the destination port.
slot_num
Module number (always 1)