Show module command – Motorola CAJUN P120 User Manual
Page 92
Chapter 7
Cajun Campus CLI (Command Line Interface)
78
Cajun P120 User’s Guide
Show Module Command
Use the
show module
command to display the Cajun P120 status and information.
If an expansion sub-module is installed it’s type and status are also shown.
The syntax for this command is:
show module [slot_num]
Example:
Console> show module
Output Fields
slot_num
Module number (always 1)
Mod
---
Module-Type
-----------
Ports
-----
Serial-Num
----------
C/S
----
Hw
----
SwVersion
----------
1
CajunP120 Base
24
4.0
Bank A: 1.0
Bank B: 1.0
Mod
---
Expansion-Type
--------------
Ports
-----
Serial-Num
----------
C/S
----
Hw
----
SwVersion
----------
1
CajunX120S2
2
Field
Description
Mod
Module number (always 1)
Module-Type
Module type: Cajun P120 Base module or Expansion sub-module
Expansion-
Type
Expansion board Type
Ports
Number of ports
Serial-Num
Serial number
C/S
Configuration Symbol
Hw
Hardware version
Sw Version
Current Software version running on the Cajun P120